Potentiometric analysis and wind turbine application of a small horizontal axis to supply power to a part of the greenhouse needs in Firoozkouh

Document Type : Review Article

Author

Master of Science (MSc), Biosistem Engineering, Campus Abourihan, University of Tehran, Tehran

Abstract

Today's energy consumption is increasing in developing countries. Most countries generate electricity from fossil fuels. Combined cycle plants produce 1 kg of 660 g of carbon dioxide gas. In study Firouzkouh province of Tehran province has been studied to use a small turbine to supply electricity to greenhouses. According to the study, Firuz Mountain has a wind density142 (w / m2) at a height of 10 meters from the ground. In this The wind speed is 5.6 m/s. Due to the wind speed and wind density in the Firoozkouh region, wind turbines of 10 and 5 kW have been used for further investigation. The 10 and 5 kW Hummer turbines produce 2394 and 1532 watts, respectively, with respect to the region's wind velocity, respectively. To reduce greenhouse costs, it is possible to invest in wind energy, while taking advantage of the environmental benefits of dispersed production and reducing the cost of greenhouse products in the long run. The reviews of this paper show that turbines 10 and 5 kilowatts of hammer in the Firoozkooh area and 10 meters high for installation and use.

Keywords

References

 
 [1] Daniel.Nugenta, Benjamin .K.Sovacool,“Assessing the lifcycle house gas emissions frome solar PV and wind energy A critical metal-surve,” energy police,vol.65.pp.229-244,2013
[2] Levent. Bilir, Mehmet.Imir, Yılser.Devrim, Ayhan.Albostan, “An investigation on wind energy potential and small scale wind  turbine,” performance at _Incek region – Ankara. Turke, Energy  Conversion and Management,vol.103 ,pp.910–923, 2015
 [5] Hüseyin.Benil, “A performance comparison between a horizontal source and a vertical source heat pump systems for a greenhouse heating in the mild climate Elaziğ,” Turkey. Applied Thermal Engineering,vol.50,pp.197-206, 2013.
 [6] L. de. Santoli, A. Albo, D.A. Garcia, D. Bruschi, F. Cumo“A preliminary energy and environmental assessment of a micro wind turbine prototype in natural protected areas, “ Sustainable Energy Technologies and Assessments, vol. 8, pp. 42-56, 2014.
[7] Miguel.Becerra, José.Morán,Alejan.droJerez,Miguel.Valenzuela, “Wind energy potential in Chile: Assessment of a small scale wind farm for residential clients,” Energy Conversion and Management,vol.140 ,pp.71–90, 2017.
[10] H .Polinder, S. Member, J. Abraham,F. Fellow,J. Member,A. B.   A.brahamsen, K. Atallah, R. A. McMaho“Trends in Wind Turbine GeneratorSystemsn,”  IEEE ., 2013.
[11] Ronit. K.Singh,M. Rafiuddin.Ahmed, “ Blade design and performance testing of a small wind turbine rotor for low wind speed  applications,” Renewable Energy,vol.50,pp.812-819, 2016
Journal of Renewable and New Energy
Volume 6, Issue 2 - Serial Number 12
September 2019
Pages 105-113

Files

History

  • Receive Date: 08 January 2019
  • Revise Date: 27 February 2019
  • Accept Date: 13 May 2019

Share

How to cite

Statistics