[1] M. Keramati, H. Beiki, The effect of pH adjustment together with different substrate to inoculum ratios on biogas production from sugar beet wastes in an anaerobic digester. Journal of Energy Management and Technology,Vol.. 1, No. 2: pp. 6-11, 2017.
[3] H., Beiki, M. Dadvar, R. Halladj, Pore network model for catalytic dehydration of methanol at particle level. AIChE Journal, Vol. 55, No. 2, p p. 442-449, 2009.
[5] T., Arunkumar,D., Murugesan, R., Kaiwalya, D., Denkenberger, C., Viswanathan, D., Rufuss, D., Winfred, R., Velraj, Effect of nano-coated CuO absorbers with PVA sponges in solar water desalting system. Applied Thermal Engineering, Vol, 148, No. 5, 2018.
[6] W., Chen, C., Zou, X., Li, L., Lu, Experimental investigation of SiC nanofluids for solar distillation system: Stability, optical properties and thermal conductivity with saline water-based fluid. International Journal of Heat and Mass Transfer, Vol. 107, 2017.
[7] E., Khodabandeh, M. R., Safaei, S., Akbari, O. A., Akbari, A., Alrashed, Application of nanofluid to improve the thermal performance of horizontal spiral coil utilized in solar ponds: Geometric study, Renewable Energy, Vol.122, 2018.
[8] H., Awad, M., Gül, E., Salim, H., Yu, Predicting the energy production by solar photovoltaic systems in cold-climate regions. International Journal of Sustainable Energy, Vol. 37, No. 10, 2018.
[9] H., Beiki, E. Soukhtanlou, Improvement of salt gradient solar ponds’ performance using nanoparticles inside the storage layer. Applied Nanoscience, Vol. 9, No. 2, 2019.
[11] M., Piratheepan, T.N. Anderson, Performance of a building integrated photovoltaic/thermal concentrator for facade applications. Solar Energy, Vol. 153, 2017.
[13] Sánchez-Palencia, P., N. Martín-Chivelet, and F. Chenlo, Modeling temperature and thermal transmittance of building integrated photovoltaic modules., Solar Energy, Vol. 184, 2019.
[14] B., Fina, H., Auer, W., Friedl, Profitability of active retrofitting of multi-apartment buildings: Building-attached/integrated photovoltaics with special consideration of different heating systems. Energy and Buildings, Vol. 190, No. 1, 2019.
[15] S., Yang ,A.,Cannavale, D., Prasad, A., Sproul, F., Fiorito, Numerical simulation study of BIPV/T double-skin facade for various climate zones in Australia: Effects on indoor thermal comfort. Building Simulation, Vol. 12, No. 1, 2019.
[16] M. M., Fouad, L.A., Shihata, A.H., Mohamed, Modeling and analysis of Building Attached Photovoltaic Integrated Shading Systems (BAPVIS) aiming for zero energy buildings in hot regions. Journal of Building Engineering, Vol. 21, 2019.
[17] Y. B., Assoa, L., Gaillard, Ch., Ménézo, N., Negri, F., Sauzedde, Dynamic prediction of a building integrated photovoltaic system thermal behaviour. Applied Energy, Vol. 214, 2018.
[18] A., Alnaqi, H., Moayedi, A., Shahsavar, T., Nguyen, Prediction of energetic performance of a building integrated photovoltaic/thermal system thorough artificial neural network and hybrid particle swarm optimization models. Energy Conversion and Management, Vol. 183, 2019.
[19] J., Alsarraf, H., Moayedi, A., Rashid, M., Muazu, A., Shahsavar, Application of PSO–ANN modelling for predicting the exergetic performance of a building integrated photovoltaic/thermal system. Engineering with Computers, 2019.
[20] Irvine, S., Solar Cells and Photovoltaics, in Springer Handbook of Electronic and Photonic Materials, S. Kasap and P. Capper, Editors, Springer International Publishing: Cham., 2017.
)
