Optimization of fluid, material and coating tube in linear parabolic trough

Document Type : Review Article

Authors

Department of Mechanical Engineering, Birjand University of Technology, Birjand, Iran

Abstract

In the near future, in the face of the world's lack of fossil fuels, the issue of renewable fuels is a source of concern for high production, installation and maintenance costs. This is the reason why the efforts of scientific and practical activities of this generation of power plants are diminished. However, experiments and empirical studies have shown that by optimizing these systems, the limitations and costs of generating electricity in these plants are reduced to a large extent. In this study, the optimal fluid state , The material of the transfer tube and the pipe coating used in linear parabolic solar collectors, and ultimately in terms of engineering and engineering, has reached the desired result.

Keywords

References

[4]Nanosayman Accessed 11 October 2017, http://www.nanosayman.com
[5] C. Jung, Technological perspectives of silicone heat transfer fluids for concentrated solar power, German Aerospace Center (DLR), Institute of Solar Research, Linder Hoehe, Energy Procedia 69, pp.  663– 671, Germany, 2014.
[6] J. Fabian Feldhoff, Comparative system analysis of direct steam generation and synthetic oil parabolic trough power plants with integrated thermal storage a German Aerospace Center, DLR, Institute for Solar Research, Pfaffenwaldring, pp. 38-40, 70569 Stuttgart, Germany, 2012.
[10] A. noghrehabadi, theoretical and experimental investigation into incident radiation on solar conical collector energy equipment and systems  pp.123-132, 2017.
[11] Sh. Delfani, experimental investigation on performance comparison of nanofluid-based direct absorption and flat plate solar collectors, international journal of nano dimension, pp. 85-96, 2016 .
[15]m. safari, improvement of thermal performance of a solar chimney based on a passive solar heating system with phase-change materials, energy equipment and systems, 2014.……..
[16] superactiveco, Accessed 4 March 2018, http://www.superactiveco.com/farsi/fluid.html
[17]Ansarco, Accessed 1 April 2015,  http://www.ansarco.biz
[18] Iranian petroleum standads, ipS-G-TP-335,The approved modifications are included in the present issue of IPS, reviewed and updated by the relevant technical committee on Aug. 2002 (1) and Feb. 2007 (2).
[19] Satba, Accessed 3 may 2016, Accessed 8February 2018,http://www.satba.gov.ir/fa/sun/powerapplications .
[20] Frank M.white, fluid mechanics, sevent edition, may 2006 .
[22] Iranian petroleum standads, ipS-C-TP-352, construction standard for lining, first revision may 2010 .
[23] Iranian petroleum standads, ipS-E-TP-350, Engineering standard for linings, first revision january 2010 .
[24] SPPC, Salafchegan Pipe Protection Co, Accessed 24February 2018, http://www.sppc.ir/FAQ.aspx .
[25] Iranian petroleum standads, ipS-C-TP-274, construction standard for protective coatings,  first revision december 2009.
[26] Iranian petroleum standads, ipS-C-TP-352, construction standard for surfase preparation, first revision may 2010 .
[27] Iranian petroleum standads, ipS-E-TP-270, Engineering standard for protective coatings for buried and submerged steel structures, first revision march 2009 .
[28] Behranoil, Accessed 14 July 2018,http://www.behranoil.com/fa/content   
Journal of Renewable and New Energy
Volume 5, Issue 2 - Serial Number 10
September 2018
Pages 67-77

Files

History

  • Receive Date: 01 June 2018
  • Revise Date: 04 August 2018
  • Accept Date: 06 August 2018

Share

How to cite

Statistics