Design of Power Generation System by Wind and Solar Hybrid Method and the Storage for Residential Use

Document Type : Review Article

Authors

1 Department of Mechanical Engineering, Tafresh University, Tafresh, Iran. P.O.B. 79611-30518, Tafresh, Iran.

2 Department of Mechanical Engineering, Kashan University, Kashan, Iran

3 Department of Aerospace Engineering, Semnan University, Semnan, Iran

4 Department of Mechanical Engineering, Tafresh University, Tafresh, Iran.

Abstract

The hybrid renewable energy system, combination of wind and solar renewable energy system and storage system, have been being used for the hybrid power supply of buildings. In this study, considering the geographic location and the electric power consumption of the dormitory building, the appropriate model for the hybrid power supply system of the building including wind turbine, photovoltaic panel, energy storage battery and converter is intended. Furthermore, by analysis and simulation of various energy systems, designed by combining the diverse dimensions of the hybrid system's components and checking them economically, the suitable hybrid system for electricity supply of the building is designed and modeled. Finally, the proper design for the power supply of the building is obtained.

Keywords

References

 [1]   C. Milan, C. Bojesen, M.P. Nielsen. A Cost Optimization Model for 100%    Renewable Residential Energy Supply System. Energy, Vol. 48, No, 1, pp.            118-127, 2012.
[2]    A.J. Marszel, P. Heiselberg, J.S. Bourrelle, E. Musall, K. Voss, I. Sartori, et al.  Zero Energy Building-A Review of Definition and Calculation.       Methodologies, Energy Build Vol. 43, No. 4, pp. 971-979, 2011.
[3]    M. Rouholamini, M. Mohammadian. Energy Management of a Grid-Tied Residential-Scale Hybrid Renewable Generation System Incorporating Fuel Sell and Electrolyzer. Energy and Buildings Vol. 102, pp. 406-416, 2015.
[4]    H. Dagdougui, R. Minciardi, A. Ouammi, M. Robba, R. Sacile, Modeling and Optimization of a Hybrid System for the Energy Supply of a “Green” Building. Energy Convers Manag Vol. 64, pp. 351-363, 2012.
 [5]   S. Prasad, V.K. Reddy, C.H. Saibabu. Integration of Renewable Energy Sin Zero Energy Building with Economical and Environmental Aspect by Using HOMER. Int J Adv Eng Sci Technol Vol. 9, No. 2, pp. 212-217, 2011.
[6]    B. Rezaie, E. Esmailzadeh, I. Dincer. Renewable Energy Options for Building Case Studies, Energy Build, Vol. 43, No. 1, pp. 56-65, 2011.
[7]    E. Fabrizo. M. Filippi, J. Virgone. An Hourly Modelling Framework for the Assessment of Energy Sources Exploitation and Energy Converts Selection and Sizing in Buildings. Energy build, Vol. 41, No. 10, pp. 1037-1050, 2009.
[8]    R. Ooka, K. Komamura. Optimal Design Method for Building Energy Systems Using Genetic Algorithms. Build Environ 44 (7) (2009) 1538-1544.
[9]    A. Hassoun, I. Dincer. Development of Power System Designs for a Net Zero Energy House. Energy Build, Vol, 73, pp. 120-129, 2014.
[10]  NASA Surface Meteorology and Solar Energ, (http://www.nasa.gov).
[11] M. Abarkan, F. Errahimi, N.K. M’Sirdi, A. Naamene. Analysis of energy consumption for a building using wind and solar energy sources. Energy procedia Vol.42, pp. 567-576, 2013.
[12]  M. Mousavi Badejani, M.A.S. Masoum and M. Kalanta. Optimal Design and Modeling of Stand-Alone Hybrid PV-Wind Systems. Proc. Int. Conf. on Power Engineering. Australasia, pp. 1-6, 2007.
[13]  A. Kashefi Kaviani, G.H. Riahy, SH.M. Kouhsari. Optimal Design of a Reliable Hydrogen-based Stand-alone Wind/PV Generation System. Proc. Int. Conf. on Optimization of Electrical and Electronic Equipment, pp. 413-418, 2008.
 [14]               M.H. Nehrir. A Course on Alternative Energy Wind/PV/Fuel Cell Power Gerneration, IEEE Power Engineering Society General Meeting, pp. 6, 2006.
[15]  M. saad Alam, D.W. Gao. Modeling and Analysis of a Wind/PV/Fuel Cell
         Hybrid Power System in HOMER, Proc. Int. Conf. on Industrial Electronics and Applications, pp. 1594-1599, 2007.
 [16]               C. Wang, and M.H. Nehrir. Power Management of a Stand-Alone Wind/Photovoltaic/Fuel Cell Energy System. IEEE Trans. on Energy Conservation, Vol. 23, No. 3, 2008.
[17]  L. Wang, C. Singh, PSObased Hybrid Generation System Design Incorporating Reliability Evaluation and Generation/Load Forecasting. Proc. Int. Conf. on Power Tech, pp. 1392-1397, 2007.
[18]  D.B. Nelson, M.H. Nehrir, C. Wang. Unit Sizing of Stand-Alone Hybrid Wind/PV/Fuel Cell Power Generation Systems. IEEE Power Engineering Society General Meeting, Vol.3, pp. 2116-2122, 2005.{Carey, 1998 #8}
[19]  F. Bonanno, A. Consoli, A. Raciti, B. Morgana, U. Nocera. Transient Analysis of Integrated Diese Wind Photovoltaic Generation Systems. IEEE Trans. On Energy Consversion, Vol. 14, No. 2, 1999.
[20]  T. Zhou, B. Francois. Modeling and control design of hydrogen production process for an active hydrogen/wind hybrid power system. International Journal of Hydrogen Energy, Vol. 34, pp. 21-30, 2009.
[21]  D. Ipsakisa, S. Voutetakis, P. Seferlis, F. Stergiopoulos, C. Elmasides. Power management strategies for a stand-alone power system using renewable energy sources and hydrogen storage. International Journal of Hydrogen Energy, pp. 1-15, 2008.{Carey, 1998 #8}
Journal of Renewable and New Energy
Volume 2, Issue 1
March 2015
Pages 35-40

Files

History

  • Receive Date: 06 August 2017
  • Accept Date: 06 August 2017

Share

How to cite

Statistics