Design and analysis of a small wind turbine with combined airfoil

Document Type : Review Article

Authors

1 Department of Agrotechnology, College of Abouraihan, University of Tehran, Tehran, Iran

2 Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran

Abstract

The purpose of this article is design and analysis of small wind turbine. To this aim, the Marvast region in Yazd province is selected as the design pilot region. Wind turbine is consisting of some components and the proper airfoil design is one of most significant issues. In this work two types of airfoils are combined that one airfoil has the proper Cstarting torque and the other one has the high efficiency. The output airfoil is a J-shape airfoil that is the combination of Savonius and Darrieus airfoils. Design is analyzed using the software and the effect of parameters is investigated.

Keywords

References

[1]       E. Hau, Wind Turbines, Fundamentals, Technologies Application economics, Springer, Berlin, 2006
[2]      A.R. Jha, Wind Turbine Technology, CRC Press, Taylor & Francis Group, New York, 2011
[4]     R.templin, aerodynamic performance teory for the NRC vertical axis wind turbine , national aeronautical establishment laboratory technical report LTR-LA-160, Canada , 1974
[5]     J. strickland the darrieus turbine , a performance prediction model using multiple stream tubes , technical report SAND75-041, Sandia National Laboratories ; Albuquerque , 1975.
 
[6]     O. Hammond, Design of an alternative hybrid vertical axis wind turbine, B.S. Major Qualifying Report, Worcester Polytechnic Institute, 2014
[7]     J. Kumbernuss, Ch. Jian, J. Wang, H.X. Yang, W.N. Fu,  A novel magnetic levitated bearing system for Vertical Axis Wind Turbines (VAWT), Applied Energy, Vol. 90(1), 2012, Pp. 148–153.
 
Journal of Renewable and New Energy
Volume 3, Issue 2 - Serial Number 6
September 2016
Pages 65-73

Files

History

  • Receive Date: 31 July 2017
  • Accept Date: 31 July 2017

Share

How to cite

Statistics