Increasing consumption of energy, fossil fuels and resources that replace renewable energies. Due to its location between 25 and 40 degrees north latitude, Iran has the highest ranks in the world in terms of receiving energy. In the geographical location of Iran, the panels should be set in the direction of absolute geographical south so that they are always facing the solar window. The orientation angle of the panels is different in different seasons, and in fixed structures, this angle is adjusted based on the data of the winter season. The detector structures have a 15-30% higher efficiency than the fixed ones; But using it is not economical. Temperature has a significant effect on the efficiency of photovoltaic panels, and exceeding the temperature of 25 degrees Celsius reduces the efficiency. Among the many methods of temperature control, only the method of using phase change materials is economical and can be implemented. Inverters convert direct current into alternating current and it is necessary to use the electricity of the solar power plant. According to the criteria and weights of the effective factors, it was determined by the relevant authorities that sunny days are of special importance among the criteria. Using the Expert Choice software, the AHP method was implemented, and the criterion of the number of sunny days gained the highest importance. Among the five selected points in Kerman city, it was the first priority for the construction of a power plant.
M. S. Kumar, S. Singh, M.K. Gupta, Y.M. Nimdeo, R. Raushan, A.V. Deorankar, ... & A.D. Nannaware, (2023). Solar energy: A promising renewable source for meeting energy demand in Indian agriculture applications. Sustainable Energy Technologies and Assessments, Vol. 55, No. 102905, 2023.
Mousavi Baighi and B. Ashraf, Identifying the areas with the lowest amount of clouds in order to zone the launch areas of the country, Water and Soil Journal (Agricultural Sciences and Industries), Vol. 3, No. 25, pp. 3-25, 2011. (in Persian)
Alizadeh, Principles of applied hydrology, Publications of Imam Reza University, 2007. (in Persian)
A. Sadeghi, Z. Dalalbashi Esfahani, H. Hari, Prioritization of factors affecting the location of renewable energy power plants (solar energy and wind energy) in Kerman province using geographic information system (GIS) and multi-criteria decision making techniques, Research Journal of Energy Planning and Policy, Vol. 2, No. 1, pp. 93–110, 2013. (in Persian)
Biwole, P. Eclache, and F. Kuznik, Improving the performance of solar panels by the use of phase-change materials, World Renewable Energy Congress, Sweden, 2011.
Hasan, J. Sarwar, H. Alnoman, S. Abdelbaqi, Yearly energy performance of a photovoltaic-phase change material (PV-PCM) system in hot climate, Sol. Energy, vol. 146, pp. 417-429, 2017.
G. Teo, P.S. Lee, M.N.A. Hawlader, An active cooling system for photovoltaic modules, Applied Energy, Vol. 1, No. 90, pp. 309-315, 2011.
A. Moharram, M.S. Abd-Elhady, H.A. Kandil, H. El-Sherif, Enhancing the performance of photovoltaic panels by water cooling, Ain Shams Engineering Journal, 2013.
C. Fok, W. Shen, F.L. Tan, Cooling of portable hand-held electronic devices using phase change materials in _nned heat sinks, International Journal of Thermal Sciences, Vol. 1, No. 49, pp. 109-117, 2009.
Ghafarian, H. Yousefi, M. Yarahmadi, Review on using of Phase Change Material (PCM) for Photovoltaic (PV) cooling, Scientific Quarterly - Promotion of renewable and new energies, Vol. 1, No. 7, pp. 74-83, 2020. (in Persian)
Hasan, S.J. McCormack, M.J. Huang, B. Norton, Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaic, Solar Energy, Vol. 9, No. 84, pp. 1601-1612, 2010.
R. Mousavi Baygi and S. M. Sadr Aamili, Designing and building a cooling system to increase the efficiency of photovoltaic panels with the help of phase change materials, mechanical engineering, Vol. 1, No32, pp. 77-82, 2016.
Emam, S. Ookawara, M. Ahmed, S. Ookawara, M. Ahmad, performance study and analysis of an inclined concentrated photovoltaic-phase change material system, sol. Energy, Vol. 150, pp. 229-245, 2017.
Khodkam, B. Najafi, The impact of wealth on the amount and type of waste produced and type of waste produced and choosing the best place it build a biogas plant using hierarchical analysis (A case study of Boukan city), The scientific quarterly of renewable and new energies, Vol. 2, No. 8, pp. 43–49, 2020. (in Persian)
khodkam, H. (2024). The best approach to build a solar power plant to increase efficiency and location in several climatic climates of Iran using AHP software. Journal of Renewable and New Energy, 11(1), 148-157. doi: 10.22034/jrenew.2023.185722
MLA
himan khodkam. "The best approach to build a solar power plant to increase efficiency and location in several climatic climates of Iran using AHP software". Journal of Renewable and New Energy, 11, 1, 2024, 148-157. doi: 10.22034/jrenew.2023.185722
HARVARD
khodkam, H. (2024). 'The best approach to build a solar power plant to increase efficiency and location in several climatic climates of Iran using AHP software', Journal of Renewable and New Energy, 11(1), pp. 148-157. doi: 10.22034/jrenew.2023.185722
VANCOUVER
khodkam, H. The best approach to build a solar power plant to increase efficiency and location in several climatic climates of Iran using AHP software. Journal of Renewable and New Energy, 2024; 11(1): 148-157. doi: 10.22034/jrenew.2023.185722
)
