Review on the Materials for Hydrogen Adsorption & Storage

Document Type : Review Article

Authors

1 Materials Engineering Department, University of Tabriz, Tabriz Iran

2 Space Thrusters Research Institute, Iranian Space Research Center, Tabriz, Iran

Abstract

Many Efforts have been made in order to use new and renewable energy instead of fossil fuels and as a supply of the needed clean energy. One of the most interesting options which attracts researches’ attention, is one of the most common element in the earth, Hydrogen. For using the hydrogen as a source of energy, there are two important points which should be considered carefully, first is the technology of production of hydrogen and second the storage of hydrogen. In this article the hydrogen adsorbent materials are introduced. The metallic hybrids, Nitrogen based materials, Mg-based materials and carbon based materials are four main groups of hydrogen storage materials that attracts many attentions.Faradic parameter described theoretically the capability of hydrogen storage. Based on the before investigation, high current density, lower voltage and high discharge rate in carbon based materials especially in carbon nano tubes increase the capability of hydrogen storage. Increasing the storage capacity of hydrogen will help human being to access the clean fuel for all uses in energy.

Keywords

References

[1] R. Amirante, E. Cassone, E. Distaso, and P. Tamburrano, “Overview on recent developments in energy storage : Mechanical , electrochemical and hydrogen technologies,” Energy Convers. Manag., vol. 132, pp. 372–387, 2017.
[2] Y. Honarpazhouh and F. Razi, “ScienceDirect Electrochemical hydrogen storage in Pd-coated porous silicon / graphene oxide,” Int. J. Hydrogen Energy, pp. 2–9, 2016.
[3] G. Raam Dheep and A. Sreekumar, “Influence of accelerated thermal charging and discharging cycles on thermo-physical properties of organic phase change materials for solar thermal energy storage applications,” Energy Convers. Manag., vol. 105, pp. 13–19, 2015.
[4] D. Su, Y. Jia, Y. Lin, and G. Fang, “Maximizing the energy output of a photovoltaic–thermal solar collector incorporating phase change materials,” Energy Build., vol. 153, pp. 382–391, 2017.
[5] A.T. Tabrizi, Sh. Khameneh, "Review on Metals and alloys with proper thermal properties as Phase Change Materials with aim of saving thermal energy", JRENEW_Volume 5_Issue 2_Pages 1-11.pdf.
[6] G. Diglio, D. P. Hanak, P. Bareschino, F. Pepe, and F. Montagnaro, “Modelling of sorption-enhanced steam methane reforming in a fi xed bed reactor network integrated with fuel cell,” Appl. Energy, vol. 210, no. July 2017, pp. 1–15, 2018.
[7] D. P. Hanak and V. Manovic, “Techno-economic feasibility assessment of CO 2 capture from coal- fi red power plants using molecularly imprinted polymer,” Fuel, vol. 214, no. October 2016, pp. 512–520, 2018.
[8] D. P. Hanak, C. Biliyok, and V. Manovic, “Efficiency improvements for the coal-fired power plant retrofit with CO 2 capture plant using chilled ammonia process,” Appl. Energy, vol. 151, pp. 258–272, 2015.
[9] M. Choi, Y. Min, G. Gwak, S. Paek, and J. Oh, “A Nanostructured Ni / Graphene Hybrid for Enhanced Electrochemical Hydrogen Storage,” J. Alloys Compd., 2014.
[10] A. Reyhani, S. Z. Mortazavi, A. N. Golikand, A. Z. Moshfegh, and S. Mirershadi, “The effect of various acids treatment on the purification and electrochemical hydrogen storage of multi-walled carbon nanotubes,” vol. 183, pp. 539–543, 2008.
[11] M. Mohammadi and B. Khoshnevisan, “ScienceDirect Electrochemical hydrogen storage in EPD made porous Ni-CNT electrode,” Int. J. Hydrogen Energy, pp. 2–6, 2015.
[12] Y. Wang, W. Deng, X. Liu, and X. Wang, “Electrochemical hydrogen storage properties of ball-milled multi-wall carbon nanotubes,” Int. J. Hydrogen Energy, vol. 34, no. 3, pp. 1437–1443, 2009.
[13] G. F. Guo et al., “Surface & Coatings Technology Electrochemical hydrogen storage of the graphene sheets prepared by DC arc-discharge method,” vol. 228, pp. 120–125, 2013.
[14] A. Eftekhari and B. Fang, “ScienceDirect Electrochemical hydrogen storage : Opportunities for fuel storage , batteries , fuel cells , and supercapacitors,” Int. J. Hydrogen Energy, vol. 42, no. 40, pp. 25143–25165, 2017.
[15] H. Zhang et al., “The electrochemical hydrogen storage of multi-walled carbon nanotubes synthesized by chemical vapor deposition using a lanthanum nickel hydrogen storage alloy as catalyst,” vol. 352, pp. 66–72, 2004.
[16] A. M. Abdalla, S. Hossain, O. B. Nis, and A. T. Azad, “Hydrogen production , storage , transportation and key challenges with applications : A review,” vol. 165, no. January, pp. 602–627, 2018.
[17]C. Series, “Hydrogen storage characterization in metal hydrides ,” 2018.
[18] H. Ghorbani and M. Ghorbani, “ScienceDirect Palladium nanoparticle and decorated carbon nanotube for electrochemical hydrogen storage,” Int. J. Hydrogen Energy, pp. 6–11, 2017.
[19] A. Lale, “Boron Nitride for Hydrogen Storage MINIREVIEW Boron nitride for hydrogen storage,” no. May, 2018.
[20] A. Zuettel, “Materials for hydrogen storage,” no. September, pp. 24–33, 2003.
[21] M. Sankir & N. D. Sankir, "Hydrogen Storage Technologies", Scrivener Publishing, 2018
[22] I. O. P. C. Series and M. Science, “Hydrogen storage properties of mechanical milled MgH2-nano Ni for solid hydrogen storage material Hydrogen storage properties of mechanical milled MgH 2 - nano Ni for solid hydrogen storage material,” 2018.
[23] O. G. Ershova and V. D. Dobrovolsky, “Ti , Fe , Ni ) with low resistance and improved kinetics of hydrogenation / dehydrogenation for hydrogen storage applications,” vol. 2, no. July, 2018.
[24] P. Transformation, H. Storage, and S. Alloy, “Lin Hu *, Rui-hua Nan *, Jian-ping Li, Ling Gao and Yu-jing Wang,” 2017.
[25] X. Chen et al., “Electrochemical hydrogen storage of carbon nanotubes and carbon nanoÿbers,” vol. 29, pp. 743–748, 2004.
[26] H. Feng, Y. Wei, C. Shao, Y. Lai, S. Feng, and Z. Dong, “Study on overpotential of the electrochemical hydrogen storage of multiwall carbon nanotubes,” vol. 32, pp. 1294–1298, 2007.
[27] M. Wu, H. Hsu, H. Chiu, and Y. Lin, “Fabrication of nickel boride-coated carbon nanotube films by electrophoresis and electroless deposition for electrochemical hydrogen storage,” Int. J. Hydrogen Energy, vol. 35, no. 17, pp. 8993–9001, 2010.
[28] P. Paolo, A. Pozio, S. Botti, and R. Ciardi, “Electrochemical studies of hydrogen evolution , storage and oxidation on carbon nanotube electrodes,” vol. 118, pp. 265–269, 2003.
Journal of Renewable and New Energy
Volume 7, Issue 2 - Serial Number 14
September 2020
Pages 12-18

Files

History

  • Receive Date: 23 May 2019
  • Revise Date: 05 October 2019
  • Accept Date: 09 October 2019

Share

How to cite

Statistics