[1] Ahmad, M. H. (1996). The Influence of Roof Form and Interior Cross section on Daylighting in The Atrium Spaces in Malaysia". University of Manchester, Ph. D. Thesis.
[2] Kim, C.-S. and Chung, S.-J. (2011). Daylighting simulation as an architectural design process in museums installed with toplights. Building and environment, 46(1), 210-222.
[3] Dubois, M.-C. and Blomsterberg, Å. (2011). Energy saving potential and strategies for electric lighting in future North European, low energy office buildings: A literature review. Energy and buildings, 43(10), 2572-2582.
[4] Binarti, F. (2009). Energy-Efficient Window For Classroom In Warm Tropical Area. Proceedings of the 2009 Eleventh International IBPSA Conference. Glasgow. Scotland.
[6] Tsangrassoulis, A. (2008). A Review of Innovative Daylighting Systems. Advances in Building Energy Research, 2(1), 33-56.
[7] Bodart, M. and De Herde, A. (2002). Global energy savings in offices buildings by the use of daylighting. Energy and buildings, 34(5), 421-429.
[8] Roshan, M. (2014). Anidolic Daylighting System for Efficient Daylighting in Deep Plan Office Building in the Tropics. Ph.D, Universiti Teknologi Malaysia, Faculty of Built Environment.
[10] Roshan, M., et al. (2014). Analysis of Anidolic Daylighting System Parameters in Tropical Climate. Life Science Journal, 11(8), 171-176.
[11] Kischkoweit-Lopin, M. (2002). An overview of daylighting systems. Solar Energy, 73(2), 77-82.
[12] Belakehal, A., Tabet Aoul, K. and Bennadji, A. (2004). Sunlighting and daylighting strategies in the traditional urban spaces and buildings of the hot arid regions. Renewable Energy, 29(5), 687-702.
[13] Kim, J. T. and Kim, G. (2010). Overview and new developments in optical daylighting systems for building a healthy indoor environment. Building and environment, 45(2), 256-269.
[14] Hwang, T. and Kim, J. T. (2012). Assessment on the indoor environmental quality in office building. Paper presented at the 7th International Symposium on Sustainable Healthy Buildings, Seoul, Korea.
[15] Leung, T. C., Rajagopalan, P. and Fuller, R. (2013). Performance of a daylight guiding system in an office building. Solar Energy, 94, 253-265.
[16] Li, D. H., Lam, T. N. and Wong, S. (2006). Lighting and energy performance for an office using high frequency dimming controls. Energy Conversion and Management, 47(9), 1133-1145.
[17] Li, D. H. (2010). A review of daylight illuminance determinations and energy implications. Applied Energy, 87(7), 2109-2118.
[18] Miyazaki, T., Akisawa, A. and Kashiwagi, T. (2005). Energy savings of office buildings by the use of semi-transparent solar cells for windows. Renewable Energy, 30(3), 281-304.
[19] Nicolow, J. (2004). Getting the green light from the sun-The benefits of daylight harvesting. Construction Specifier, 57, 58-65.
[20] Robbins, C. L. (1986). Daylighting. Design and analysis. New York: Van Nostrand: Van Nostrand Reinhold Co. Inc.,.
[21] Romm, J. J. and Browning, W. D. (1998). Greening the building and the bottom line: Increasing productivity through energy-efficient design. Snowmass: Rocky Mountain Institute.
[22] Santiago, G. (2011). Towards daylight guidelines for tropical climates. Proceedings of the 2011 People and Buildings held at the offices of Arup UK. 23rd September 2011. London,
[23] Urmee, T., Thoo, S. and Killick, W. (2012). Energy efficiency status of the community housing in Australia. Renewable and Sustainable Energy Reviews, 16(4), 1916-1925.
[24] Waewsak, J., Hirunlabh, J., Khedari, J. and Shin, U. (2003). Performance evaluation of the BSRC multi-purpose bio-climatic roof. Building and environment, 38(11), 1297-1302.
[25] Alzoubi, H. H. and Al-Zoubi, A. H. (2010). Assessment of building façade performance in terms of daylighting and the associated energy consumption in architectural spaces: Vertical and horizontal shading devices for southern exposure facades. Energy Conversion and Management, 51(8), 1592-1599.