[1] P. Reddy, M. V. N. Surendra Gupta, S. Nundy, A. Karthick, A.Ghosh, Status of BIPV and BAPV System for Less Energy-Hungry Building in India- Review, Applied Sciences, Vol. 10, No. 7, 2020.
[2] L. Antoine, N. M. Kuehnera, A. T. D. Silvia Coccoloa, N. Pereraa Mohajeria, Jean-Louis Scartezzinia, Extending building integrated photovoltaics (BiPV) using distributed energy hubs. A case study in Cartigny, Switzerland, in International Conference – Future Buildings & Districts – Energy Efficiency from Nano to Urban Scale, CISBAT,Lausanne, Switzerland, 2017.
[3] M. M. Fouad, A. Lamia Shihata, A. H. Mohamed, Modeling and Analysis of Building Attached Photovoltaic Integrated Shading Systems (BAPVIS) Aiming for Zero Energy Buildings in Hot Regions, Journal of Building Engineering, Vol. 21,pp.18-27, 2018.
[4] L. S. Aguacil, E. Rey, Active surfaces selection method for building integrated photovoltaics (BIPV) in renovation projects based on self-consumption and self-sufficiency, Energy & Buildings, Vol. 193,pp.15-28, 2019.
[5] R. Benoit Cushman, A.l.o.o.p. Tanaka Cremonini, Data, Statistics, and Useful Numbers for Environmental Sustainability, Thayer School of Engineering, Dartmouth College, Hanover, NH, USA, 2021.
[6] L.P. Lombarda, J. Ortiz, R. González, I. Maestrec, Energy and Buildings, Vol.41, pp. 272–278, 2009.
[7] B. Shui, M. Evans, Country Report on Building Energy Codes in Canada, 2009.
[8] J. Khodakarami, Ghobadi, P. Optimization of energy consumption in an office building equipped with intelligent management system, Energy Engineering & Management, Vol.6, No.2, 2016. (in Persian)
[9] G. Bizzarri, M. Gillott, V. Belpoliti, The potential of semitransparent photovoltaic devices for architectural integration. The development of device performance and improvement of the indoor environmental quality and comfort through case-study application. Sustainable Cities and Society, Vol.1, No.3, pp. 178–185,2011.
[10] M. Mandalaki, K. Zervas, T. Tsoutsos, A. Vazakas, Assessment of shading devices with integrated PV for efficient energy use, Solar Energy, Vol.86, No. 9, 2012.
[11] A. Guiavarch, B. Peuportier, Photovoltaic collector’s efficiency according to their integration in buildings, Solar Energy, Vol.80, pp. 65–77, 2006.
[12] T. J. N. Schoen, Building integrated PV installations in the Netherlands: examples and operational experiences, Solar Energy, Vol.70, pp. 467–477, 2001.
[13] A. I. Palmero-Marrero, A. C. Oliveira, Evaluation of a solar thermal system using building louver shading devices, Solar Energy, Vol.80, pp. 545–554, 2006.
[14] Law of the Fourth Five-Year Development Plan of the Islamic Republic of Iran, approved on 11/06/2004, Publications of the Islamic Consultative Assembly of Iran, 2010-2011. (in Persian)
[15] S. M. Mousavi Shafaei, Y. Noorollahi, A. R. Ghiyabashi, H. Yousefi, A. H. Rezaian, Human Security and Challenges of Renewable Energy Development in Iran, with Emphasis on Environmental Security. Journal of Environmental Science and Technology, Vol.18, No. 5, 2016. (in Persian)
[16] P. Alamdari, O. N.ematollahi, A. A. Alemrajab, Solar energy potentials in Iran: A review, Renewable and Sustainable Energy Reviews, Vol.21, pp. 778–788, 2013.
[17] M. A. Paydar, Optimum Design of Building Integrated PV Module as a Movable Shading Device, Sustainable Cities and Society, Vol.62, 2020.
[18] A. Stamatakis, M. Mandalaki, T. Tsoutsos, Multi-criteria analysis for PV integrated in shading devices for Mediterranean region Energy and Buildings, Vol.117, pp. 128–137, 2016.
[19] L. Maturi, J. Adami, Building Integrated Photovoltaic (BIPV) in Trentino Alto Adige, Green Energy and Technology, Springer International Publishing, 2018.
[20] S. Pester, F. Crick, Performance of Photovoltaic Systems on Non-domestic Buildings, IHS BRE Press, 2013.
[21] S. Eftekharnejad,
V. Vittal, G. Thomas Heydt, B. Keel, J. Loehr, Impact of Increased Penetration of Photovoltaic Generation on Power Systems,
IEEE TRANSACTIONS ON POWER SYSTEMS, Vol.28, No. 2, 2013.
[22] E. I. Batzelis, P. S. Georgilakis, S. A. Papathanassiou, S.A., Energy Models for Photovoltaic Systems under Partial Shading Conditions: A Comprehensive Review, Renewable Power Generation, Vol.9, pp. 340–349, 2014.
[23] T. D. Atmaja, Facade and Rooftop PV Installation Strategy for Building Integrated Photo Voltaic Application, Energy Procedia, Vol.32, pp. 105–114, 2013.
[24] x. Zhang, siu-kit. lau, S. Siu Yu Lau, Z. Yong, Photovoltaic integrated shading devices (PVSDs): A review, Solar Energy, Vol.170, pp.947-968, 2018.
[25] Yoo, S.H., Simulation for an optimal application of BIPV through parameter variation. Solar Energy, Vol.85, No.7, pp.1291-1301, 2011.
[26] S. E. Gindi, A. R. Abdin, A. Hassan, Building integrated Photovoltaic Retrofitting in office buildings. Energy Procedia, Vol.115, pp. 239–252, 2017.
[27] y. Ibraheem, E. R. P. Farr, P. Piroozfar, Embedding passive intelligence into building envelopes: a review of the state-of-the-art in integrated photovoltaic shading devices, in 8th International Conference on Sustainability in Energy and Buildings, Turin, ITALY. pp. 11-13, 2016.
[28] M. C. Dubois, Solar Shading and Building Energy Use, A Literature Review, Part I, Lund University, Institute of Technology, 1997.
[29] A. Tzempelikos, A. Athienitis, The impact of shading design and control on building cooling and lighting demand. Solar Energy, Vol.81, pp. 369–382, 2007.
[30]
F. D. Miran,
H. Abdullah, Evaluation of the Optimal Sola Shading Devices for Enhancing Daylight Performance of School Building, A case study of semi-arid climate–Erbil city,
ZANCO Journal of Pure and Applied Sciences, Vol.27, No.5, pp. 29-36,
2016.
[31] A. Thomas, H. Rainer, J. Simone, K. Birgit, A design manual: office buildings, Basel, Boston, Birhäuser, 2002.
[32] F. Mohammadkhani, The effect of additional canopies and two-shell facade in reducing energy consumption, in The Second International Conference on New Approaches to Energy Conservation, Tehran, Iran, 2013. (In Persian)
[33] W. N. Hien, A. D. Istiadji, Effects Of External Shading Devices On Daylighting And Natural Ventilation, in the Eighth International IBPSA Conference, Netherlands, 2003.
[34] S. S.Saifelnasr, A Design Chart to Determine the Dimensions of a Horizontal Shading Device over an Equator-Facing Window as a Function of the Latitude and the Shading Height, Procedia - Social and Behavioral Sciences, Vol.216, pp. 724-735, 2015.
[35] M. Rashid, A. Jalil, S. Gulzar, A. M. Malik, The Efficacy of Shading Design in Commercial Buildings in The Semi-arid Climate of Lahore; Focusing on The Geometry of Horizontal Shade, Technical Journal, University of Engineering and Technology (UET), Vol.24, No.2, 2019.
[36] C. Karkanias, S. N. Boemi, A. M. Papadopoulos, T. D. Tsoutsos, A. Karagiannidis, Energy efficiency in the Hellenic building sector: An assessment of the restrictions and perspectives of the market, Energy Policy, Vol.38. No.6, pp. 2776–2784, 2010.
[37] M. J. Mahdavinejad, M. Arbab, M. Arbab, The use of genetic algorithm in multi-objective optimization of external louvers in office buildings. Architectural Thought, Vol.3, No.5, 2019. (in Persian)
[39] A. I. Palmero-Marrero, A. C. Oliveira, Effect of louver shading devices on building energy requirements, Applied Energy, Vol.87, No.6, pp. 2040-2049, 2010.
[40] N. Lechner, Heating, Cooling, Lighting: Sustainable Design Methods for Architects, John Wiley & Sons, 2015.
[41] B. A. Maleki, Shading: Passive Cooling And Energy Conversation in Buildingn, International Journal on Technical and Physical Problems of Engineering, Vol.3, No.9, pp. 72–79, 2011.
[42] (EIA), E.I.A., The Annual Energy Revie, EIA, 2006.
[43] H. K. Abdullah, H. Z. Alibaba, Retrofits for Energy Efficient Office Buildings: Integration of Optimized Photovoltaics in the Form of Responsive Shading Devices, Sustainability, Vol.9, No.11, 2017.
[44] D. F. Menicucci, J. P. Fernandez, Verification of photovoltaic system modeling codes based on system experiment data, in 17th IEEE Photovoltaic Specialists Conference, Kissimmee, FL, USA. pp. 1335–1340, 1984.
[45] P. Eiffert, J. G. Kiss, Building – Integrated photovoltaic, design for com-mercial and institutional structures: A source book for architects, US Department of Commerce: Springfield, 2000.
[46] W. Bahr, Integration of shading devices and photovoltaic panels into existing building facades, in Green Retrofit Conference Dubai Knowledge Village, Dubai, UAE, 2009.
[47] W. Bahar, Optimal Design Parameters of The Blinds Integrated Photovoltaic Modules Based on Energy Efficiency and Visual Comfort Assessments, in Proceedings of Central Europe towards Sustainable Building Conference, Czech Republic, Prague, 2013.
[48] M. Mandalaki, T. Tsoutsos, N. Papamanolis, Integrated PV in shading systems for Mediterranean countries: balance between energy production and visual comfort, Energy Buildings, Vol.77, pp. 445-456,2014.
[49] S. Kang, T. Hwang, J. Tai Kim, Theoretical analysis of the blinds integrated photovoltaic modules, Energy Buildings, Vol.46, pp. 86-91,2012.
[50] C. Peng, Y. Huang, Z. Wu, Building-integrated photovoltaics (BIPV) in architectural design in China, Energy and Buildings, Vol.43: pp. 3592–3598, 2011.
[51] J.J. Bloem, Evaluation of a PV-integrated building application in a well-controlled outdoor test environment, Building and Environment, Vol.43, No.2, pp. 205–216, 2008.
[52] x. Li, J. Peng, N. Li, M. Wang, C. Wang, Study on Optimum Tilt Angles of Photovoltaic Shading Systems in Different Climatic Regions of China, Procedia Engineering, Vol.205, pp. 1157–1164,2017.
[53] P. Jayathissa, M. Luzzatto, J. Schmidli, J. Hofer, Z. Nagy, A. Schlueter, Optimizing building net energy demand with dynamic BIPV shading, Applied Energy, Vol.202: pp. 726–735, 2017.
[54]M. H. pir salami, Sh. Golbahar Haghighi, Determining the optimal angle of solar panels in Shiraz, The first national conference on engineering sciences with a new energy approach, 2016. (in Persian)
[55] M. Hazbei, Natural ventilation in Shodan, Dezful city using CFD model, Bagh-e Nazar, Vol.30, pp. 37-48, 2013. (In Persian)
[56] National Building Regulations of Iran, Article 19, Save energy,Office of National Building Regulations, Tehran, Iran, 2010. (in Persian)
[57] Z. Zomorodian, M. Tahsildoost, Validation of energy simulation software in building with experimental and comparative approach, Iranian Journal of Energy, Vol.18, No9, 2015. (In Persian)
[58]Information base and statistics and electricity information of Fars region,2018. (In Persian)
[59] K. Jafarpour, M. Yaghoubi, Solar radiation for Shiraz,Iran, Solar & Wind Technology, Vol.6, No.2, pp. 177-179, 1989.
[60] A. A. Sabzi, B. Khatar, H. Mohabzadeh, Investigation and comparison of GIS capability in zoning of seasonal and annual distribution of total solar radiation (Case study: Central provinces of Iran.), Iranian Journal of Geophysics, Vol.9, No.2, pp.14-29 2015. (In Persian)
[61] N. Amani, M. Mashad Moghadas, Feasibility study of building a zero energy building in cold and semi-arid region,Case study of Mashhad, Environmental Science and Technology, Vol.22, No.5, pp. 57-71, 2018. (In Persian).
[62] A. A. Abdollahi, H. Ghazanfarpour, Z. Rezaei, Survey and evaluation of land use in 9 regions of Shiraz using LQ model in GIS environment, Journal of Spatial Planning (Geography), Vol.5, No.1, 2014. (In Persian).
[63] Department of Housing and Urban Development Deputy Minister of Housing and Construction, National Building Regulations of Iran, The second issue Administrative systems, 2005. (In Persian).
[64] M. Alwetaishi, H. Al-Khatri, O. Benjeddou, A. Shamseldin, M. Alsehli, S. Alghamdi, R. Shrahily, An investigation of shading devices in a hot region: A case study in a school building, Ain Shams Engineering Journal, Vol.12, No.3, pp. 3229-3239, 2021.
[64]Solar radiation of Shiraz, Accessed 2 January 2021, https://globalsolaratlas.info. 2022.
)
