@article { author = {Baharnejad, Pooria and Sheikhi Azqandi, Mojtaba and Shakib, Seyyed Ehsan}, title = {Optimizing output gas temperature of the pressure reducing station in Shahid Kaveh combined cycle power}, journal = {Journal of Renewable and New Energy}, volume = {4}, number = {1}, pages = {9-15}, year = {2017}, publisher = {Iranian Society of Heating Refrigeration Air Conditioning Engineers (IRSHRAE)}, issn = {2423-4931}, eissn = {2676-2994}, doi = {}, abstract = {The pressure of natural gas in letdown station is reducedin order to reach the desired pressure for using the other units. The present work is done to optimize the output temperature of pressure regulating station at “Shahid Kaveh of Qaen” combined cycle power plant. The reported optimization is based on prevention of the clathrate hydrates formation, the temperature domain, in which the energy consumption is optimized and combustion efficiency at gas consumption post is appropriate. The purposes of this optimization are fuel consumption reduction, better operation of gas heaters, operating costs decrease, less damage in mechanisms and construction period reduction.In order that, at first the gas regulator geometry is modeled then with Computationalfluiddynamics, the simulations and analysis are done.Finally,by comparing the output gas temperature with the standard temperature range of natural gas extracted from engineering handbooks, the adjustment of the heater output temperature is possible in order to prevent the formation of gas hydrates.  }, keywords = {optimization,Pressure Reduction,Combined Cycle Power Plant,Temperature}, title_fa = {بهینه سازی شرایط دمایی گاز خروجی از ایستگاه تقلیل فشار نیروگاه سیکل ترکیبی شهید کاوه}, abstract_fa = {فشار گاز طبیعی در ایستگاه­ تقلیل فشار به منظور رسیدن به فشار مطلوب برای مصرف در واحدهای دیگر نیروگاه­ها کاهش می­یابد. پژوهش حاضر به منظور بهینه­سازی شرایط دمایی گاز خروجی از ایستگاه تقلیل فشار نیروگاه سیکل ترکیبی شهید کاوه قاین انجام گرفته است. بهینه سازی بر مبنای جلوگیری از تشکیل هیدرات گازی و نیز دامنه دمایی که در آن مصرف انرژی بهینه و راندمان احتراق در محل مصرف گاز مناسب است، صورت پذیرفته است. هدف از این مقاله، بهینه سازی کاهش مصرف سوخت، کاهش استهلاک و بهبود کارکرد هیترهای گاز، کاهش هزینه­های بهره برداری و همچنین کاهش صدمات و خسارات و دوره­های تعمیراتی مورد نیاز می­باشد. برای این منظور ابتدا مدلسازی هندسی دستگاه رگولاتور نیروگاه انجام گرفته و سپس با استفاده از روش دینامیک سیالات محاسباتی، تجزیه و تحلیل­های لازم بر روی هندسه مورد نظر اعمال شده است. در نهایت با مقایسه دمای گاز خروجی در محدوده­ی دمای استاندارد گاز طبیعی که از هندبوک­های مهندسی استخراج شده است، امکان تنظیم دمای گاز خروجی از گرمکن در محدوده­ی دمایی استاندارد جهت جلوگیری از تشکیل هیدرات گازی فراهم شده است. }, keywords_fa = {بهینه سازی,تقلیل فشار,نیروگاه سیکل ترکیبی,دما}, url = {https://www.jrenew.ir/article_50851.html}, eprint = {https://www.jrenew.ir/article_50851_58436acb21febdebfab1b9a9cc2cb753.pdf} }